TURBOCAST®-ORTHO
• When the material is
heated it becomes
transparent and turns
opaque once it cools
down.
• Easy auto-bounding (no
solvents needed)
Processing methods
• Water bad from 60°C-65°C
(140°F - 159°F)
• Oven from 100°C (212°F)
Using a water bath
• To soften Turbocast-Ortho, place the material
into a water bath at temperature 60°C - 65°C
(140°F - 159°F) for 60-90 seconds or until
sufficiently soft.
• When ready, take the material out of the water
and place on a flat surface (preferably a wooden
board) for +/- 10 seconds. Temperature will
immediately drop to +/- 35°C (95°F).
TURBOCAST ORTHO
Moulding Characteristics
MaximumMaximumMaximumModerate100%Maximum
BoundingEase of
finishing
StretchDrapeMemoryTransparency
Specification Chart
Thickness Dimensions NON MICRO MINI MULTI
1.6 mm
1/16”
43 x 60 cm
17” x 24”
Ox160 Ox161 Ox162 Ox163
2 mm
1/12”
45 x 60 cm
18” x 24”
Ox200 Ox201 Ox202 Ox203
2.5 mm
1/10”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox250 Ox252 Ox253
3.2 mm
1/8”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox320 Ox322 Ox323
4 mm
1/6”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox400 Ox402
Colour Range: In the code please replece “x” colour specification
S – for skin colour; RB – royal blue; W – white; P – purple
If you need large sheet of 60x90 cm add: /9
Specification Chart
TURBOCAST ORTHO NON STICKY
Thickness Dimensions NON MICRO MINI MULTI
1.6 mm
1/16”
43 x 60 cm
17” x 24”
Ox160NS Ox161NS Ox162NS Ox163NS
2 mm
1/12”
45 x 60 cm
18” x 24”
Ox200NS Ox201NS Ox202NS Ox203NS
2.5 mm
1/10”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox250NS Ox252NS Ox253NS
3.2 mm
1/8”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox320NS Ox322NS Ox323NS
4 mm
1/6”
45 x 60 cm / 18”x24”
60 x 90 cm / 24” x 36”
Ox400NS Ox402NS
